Please help me ab my problem

Moderators: davetaflin, salter, steve, jprenaud, straton, Chris Idso

cagdaskutlu
Newbie
Posts: 3
Joined: Tue May 09, 2017 3:33 am
Location: Turkey

Please help me ab my problem

Postby cagdaskutlu » Tue May 16, 2017 12:42 pm

I plotted polar diagram with 3 different variables depends speed and angle. As you can see here : https://ibb.co/nxSObQ this pic. is exported from tecplot. But it's not suitable for my problem. I need like this : https://ibb.co/cGWui5 I drew this pic in paint. ( you can see the pics in attachment.)

Can someone help me please ?
Attachments
q2.jpg
q2.jpg (86.11 KiB) Viewed 2258 times
q1.jpg
q1.jpg (119.17 KiB) Viewed 2258 times

Svetlana
Expert
Posts: 93
Joined: Sun Dec 22, 2013 3:08 pm
Location: Australia
Contact:

Re: Please help me ab my problem

Postby Svetlana » Tue May 16, 2017 7:46 pm

The only difference is that you wold like to add the color fill, right?

cagdaskutlu
Newbie
Posts: 3
Joined: Tue May 09, 2017 3:33 am
Location: Turkey

Re: Please help me ab my problem

Postby cagdaskutlu » Wed May 17, 2017 8:34 am

Svetlana wrote:The only difference is that you wold like to add the color fill, right?

Yes but I need also color band header like in the pic in first post.(I can do it via paint,if I can solve first part you asked. This is only one of few cases.Also I will have another case like in pic:
export.jpg
export.jpg (80.55 KiB) Viewed 2250 times


Can you help me about it ???
The limits are :
Roll :3
Pitch:1
Vacc:0.8
My excel file like :
Heading Speed Roll Pitch Vacc (HP)
0 0 0.000 1.124 0.054
15 0 1.700 1.146 0.056
30 0 2.756 1.208 0.062
45 0 3.654 1.282 0.074
60 0 4.266 1.296 0.092
75 0 4.470 1.042 0.110
90 0 4.398 0.110 0.086
105 0 4.438 1.216 0.124
120 0 4.262 1.528 0.106
135 0 3.664 1.498 0.086
150 0 2.770 1.404 0.074
165 0 1.708 1.330 0.066
180 0 0.000 1.304 0.064
195 0 1.708 1.330 0.066
210 0 2.770 1.404 0.074
225 0 3.664 1.498 0.086
240 0 4.260 1.528 0.106
255 0 4.438 1.216 0.124
270 0 4.398 0.110 0.086
285 0 4.470 1.042 0.110
300 0 4.266 1.296 0.092
315 0 3.654 1.282 0.074
330 0 2.756 1.208 0.062
345 0 1.700 1.146 0.056
360 0 0.000 1.124 0.054
0 5 0.000 0.988 0.028
15 5 1.606 1.012 0.030
30 5 3.204 1.076 0.036
45 5 4.670 1.164 0.046
60 5 5.330 1.212 0.064
75 5 4.932 1.032 0.090
90 5 4.084 0.094 0.088
105 5 3.568 1.174 0.128
120 5 2.958 1.536 0.120
135 5 2.188 1.534 0.104
150 5 1.412 1.448 0.094
165 5 0.728 1.378 0.088
180 5 0.000 1.352 0.088
195 5 0.728 1.378 0.088
210 5 1.412 1.448 0.094
225 5 2.188 1.534 0.104
240 5 2.958 1.536 0.120
255 5 3.568 1.174 0.128
270 5 4.084 0.094 0.088
285 5 4.932 1.032 0.090
300 5 5.330 1.212 0.064
315 5 4.672 1.164 0.046
330 5 3.204 1.076 0.036
345 5 1.606 1.012 0.030
360 5 0.000 0.988 0.028
0 10 0.000 0.924 0.014
15 10 0.748 0.948 0.014
30 10 1.720 1.016 0.018
45 10 2.984 1.110 0.026
60 10 3.958 1.174 0.042
75 10 3.802 1.024 0.072
90 10 2.768 0.082 0.088
105 10 2.274 1.132 0.138
120 10 1.800 1.512 0.136
135 10 1.234 1.532 0.122
150 10 0.744 1.452 0.11
165 10 0.348 1.380 0.104
180 10 0.000 1.354 0.104
195 10 0.348 1.380 0.104
210 10 0.744 1.452 0.11
225 10 1.234 1.532 0.122
240 10 1.800 1.512 0.136
255 10 2.274 1.132 0.138
270 10 2.768 0.082 0.088
285 10 3.802 1.024 0.072
300 10 3.958 1.174 0.042
315 10 2.984 1.110 0.026
330 10 1.720 1.016 0.018
345 10 0.748 0.948 0.014
360 10 0.000 0.924 0.014
0 14 0.000 0.862 0.008
15 14 0.576 0.896 0.008
30 14 1.150 0.990 0.010
45 14 1.856 1.110 0.016
60 14 2.676 1.178 0.032
75 14 2.846 1.024 0.060
90 14 2.008 0.074 0.090
105 14 1.638 1.100 0.146
120 14 1.308 1.476 0.152
135 14 0.888 1.508 0.140
150 14 0.530 1.436 0.126
165 14 0.246 1.366 0.120
180 14 0.000 1.340 0.118
195 14 0.246 1.366 0.120
210 14 0.530 1.436 0.126
225 14 0.888 1.508 0.140
240 14 1.308 1.476 0.152
255 14 1.638 1.100 0.146
270 14 2.006 0.074 0.090
285 14 2.846 1.024 0.060
300 14 2.676 1.178 0.032
315 14 1.856 1.110 0.016
330 14 1.150 0.990 0.010
345 14 0.576 0.896 0.008
360 14 0.000 0.862 0.008
0 18 0.000 0.968 0.018
15 18 0.406 0.974 0.016
30 18 0.844 0.962 0.010
45 18 1.662 1.106 0.010
60 18 1.944 1.218 0.022
75 18 2.070 1.038 0.052
90 18 1.490 0.066 0.090
105 18 1.208 1.068 0.158
120 18 0.980 1.432 0.170
135 18 0.666 1.466 0.160
150 18 0.398 1.398 0.148
165 18 0.186 1.334 0.140
180 18 0.000 1.308 0.138
195 18 0.186 1.334 0.140
210 18 0.398 1.398 0.148
225 18 0.666 1.466 0.160
240 18 0.980 1.432 0.170
255 18 1.208 1.068 0.158
270 18 1.490 0.066 0.090
285 18 2.070 1.038 0.052
300 18 1.944 1.218 0.022
315 18 1.662 1.106 0.010
330 18 0.844 0.962 0.010
345 18 0.406 0.974 0.016
360 18 0.000 0.968 0.018

cagdaskutlu
Newbie
Posts: 3
Joined: Tue May 09, 2017 3:33 am
Location: Turkey

Re: Please help me ab my problem

Postby cagdaskutlu » Wed May 17, 2017 8:36 am

Svetlana wrote:The only difference is that you wold like to add the color fill, right?

Whem I fill with color like pic,the zone and other lines under the colorful zone go missing.


Return to “Tecplot 360 and Focus”

Who is online

Users browsing this forum: No registered users and 3 guests